2
MEANINGS
OF
SYMBOLS
NOTE:
Some units do not carry them.
Symbols
WARNING
The
following
show
symbols
used
for
the
machine.
Be
sure
that
you
understand
their
meaning
before
use.
It is important that you read, fully
understand and observe the
following safety precautions and
warnings.
Careless or improper use of the
unit may cause serious or fatal
injury.
Shows maximum shaft
speed. Do not use the cutting
attachment whose max rpm is
below the shaft rpm.
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Gloves should be worn
when necessary, e.g., when
assembling cutting equipment.
Always wear eye, head and ear
protectors when using this unit.
Use anti-slip and sturdy
footwear.
Keep all children, bystanders and
helpers 15 m away from the unit.
If anyone approaches you, stop
the engine and cutting attachment
immediately.
Blade thrust may occur when
the spinning blade contacts a
solid object in the critical area. A
dangerous reaction may occur
causing the entire unit and
operator to be thrust violently.
This reaction is called blade
thrust. As a result, the operator
may lose control of the unit
which may cause serious or
fatal injury. Blade thrust is more
likely to occur in areas where it
is di
ffi
cult to see the material to
be cut.
Be careful of thrown objects.
Contents
WHAT IS WHAT .................................................... 3
WARNINGS AND SAFETY INSTRUCTIONS ........ 4
SPECIFICATIONS ................................................. 6
ASSEMBLY PROCEDURES ................................. 7
OPERATING PROCEDURES .............................. 10
MAINTENANCE .................................................. 13
000Book̲TCG40EAS(P)̲̲US.indb 2
000Book̲TCG40EAS(P)̲̲US.indb 2
2009/11/27 17:15:44
2009/11/27 17:15:44
