21
Tanco Autowrap 404 EH
Operators manual
8.4 404 EH Sensors
.
The 404 is a very compact machine. To ensure that all parts in a safe
position during operation the controller checks the status of sensors
before starting
.
The status of the sensor inputs to the controller can be checked by pressing and holding the
down button on the 4 way menu button.
See section 8.5 on following page which shows which sensors need to be closed for each
operation.
Table
Horizontal
(Connector pos. 2)
(Input Check 5)
Load
Position
(Connector pos. 4)
(Input Check 2)
Rotate and
Tip Position
(Connector pos.1)
(Input Check 1)
Load Arm
Down
(Connector pos. 3)
(Input Check 3)
