5
Tanco Autowrap 404 EH
Operators manual
1.0 INTRODUCTION.
TANCO AUTOWRAP Ltd. congratulates you with the choice of MINI WRAP bale wrapping
machine. We are certain you will be satisfied with the machine, and that you will have the
pleasure of your investment for many years.
MINI WRAP 404 EH is hydraulically driven by the tractors hydraulic system, and is easy to
operate with the RDS control box.
The MINI WRAP 404 EH is designed to be a simple and effective bale wrapping machine square
bales.
MINI WRAP 404EH is estimated for wrapping bales of grass, hay or straw, it can handle bales
from 35cm x 45cm up to 50cm x 50cm. The bales must have a weight of at least 35kg.
This manual is meant to explain how MINI WRAP is prepared, mounted, used and how it works,
and shall together with the spare part’s list be a reference for maintenance and troubleshooting. So
take good care of the books, they are a part of the machine.
Read carefully through this manual, and specially chapter 2.0, safety instructions, before starting
the machine, and follow the instructions thoroughly. If problems should occur, please contact your
MINIWRAP dealer. Ask your dealer for advice before you make the problem worse than it is.
See also chapter 13.0, Warranty terms.
TANCO AUTOWRAP Ltd can change the construction and/or technical specifications without
warning and without rights to changes on already delivered products.
© Copyright. All rights reserved. Any copying and reproduction of this manual is not permitted
without permission from TANCO AUTOWRAP Ltd
Technical Specifications
MINI WRAP 404 EH
Height in working position
Width
Length
Weight
Turntable speed, recommended
Turntable speed, max.
Bale size, max.
Bale weight, min
Pre-stretcher
Hydraulic connection
Oil pressure / amount, mm.
Oil amount, max.
Counter pressure, max.
930 mm
1640 mm
3200 mm
625 kg
22 rev, per minute
27 rev, per minute
500 x 500 x 1150 mm
35kg
500 mm
I single spool free return
100 bar / 15 liter per minute
30 liter per minute
10 bar
