21
20/03/2015
Tanco Autowrap 404
Operators manual
10.0 CHECK POINTS BEFORE TROUBLE SHOOTING.
In this chapter we have some general check points that have to be examined first if something is
wrong with the machine. In chapter 11.0 we have a more detailed trouble shooting.
There are two basic assumptions that have to be fulfilled if the machine shall function properly:
1.
The oil pressure from tractor should be 180 bar.
2.
The return flow of oil has to be as free as possible, max. 10 bar counter pressure.
10.1
OIL PRESSURE.
In order to control that tile oil pressure into the machine is high enough, there has to be applied
a gauge to the oil pressure hose, for example on the quick coupler.
If the pressure is less than 180 bar, there will be less power for the functions.
OIL AMOUNT.
The oil amount that the tractor delivers must be minimum 15 liters/minute, (Max. allowed
oil amount
is 25 minute/minute).
REMEMBER! Large oil amount
=
Valves get hot. (Small oil tank
=
insufficient cooling).
10.2
RETURN PRESSURE.
The return line pressure can be too high. With high return pressure the machine’s functions will
get less power. High return pressure means also that you need more power to operate the valves.
MAX. ALLOWED RETURN PRESSURE IS 10 BAR.
If you are in doubt about the return pressure, arrange a “free return” directly to the tank.
PLEASE CONTACT YOUR DEALER IF YOU ARE IN DOUBT OF ANYTHING.
(Remember always to give your dealer the serial number and production year of your
machine when contacting dealer and when ordering spare parts).
