background image

Tanco Autowrap - 1310 / 1320

Operator’s Manual

16

Emergency Stop (See Fig. 6.3)

This machine is equipped with a safety guards on the Wrapping Arms, 

and its operation must be tested before work itself is started. 

The Emergency Stop is to prevent the Wrapping Arm from damaging 

people and objects, when the machine is started and during the 

wrapping process. It consists of two safety arms that run in front of the

film dispensers. When tripped they activate an electric switch, which 

gives a signal to the control box to activate the emergency stop.

When testing this function, start the Wrapping Arm, hold out an arm or any obstacle. 

The wrapping arm shall now stop before it hits the arm.  Great care must be taken 

when testing this function. 

To restart the machine the obstacle must be removed 

and the arm must be returned to its original position. The Auto Switch on the control 

box must be activated again. The wrapping may start again. 

           IMPORTANT!

GIVEN THE VELOCITY AND MOMENTUM OF THE ARM IT IS IMPOSSIBLE TO STOP THE WRAP ARM IMME-

DIATELY.  THE EMERGENCY STOP ARM IS PROVIDED TO HELP REDUCE THE RISK OF SERIOUS INJURY AND 

GREAT CARE MUST BE TAKEN WHEN OPERATING THIS MACHINE. 

Electronic Switch

Safety Arm

Wrapping Arm

Film Dispenser

Fig. 6.3

6. MACHINE SETUP

Summary of Contents for 1300 Series

















































































































Reviews: