Tanco Autowrap - I75 Multi Shear
Operator’s Manual
10
Operating the Multi Shear for Round Bales
1. With the Multi Shear fully open and with the tines resting on the ground, approach the bale and move the tractor forward
until the bale is pressed tightly against the Shear Grabs’ main frame.
2. Move the hydraulic control lever to close the shear frame down onto the bale, whilst at the same time the gripper closes and
grips the plastic.
3. Transport the bale to where it is to be split and operate the hydraulic control lever to close the Multi Shear so that it pierces
the plastic wrap and slices the bale down the centre.
5. OPERATING INSTRUCTIONS