Tanco Autowrap -
VariAuto
Operator’s Manual
20
- Rollers Out or Wrap Arm Unfold (L5)
This button has two functions; its primary function is to operate rollers out to unload the bale. If the programming factor Roller Out is set to 0.0 in the Operator Setup on the controller
then this button must be held down for the duration of the unloading operation. If a time is set for Roller Out then one touch of this button will trigger the function to operate for that
time. In M manual mode the button must be held down for the duration of the unloading.
This button also manually performs the wrap arm unfold (to the straight position) function. To get it to change to this function hold down the Esc button (left side on 4 position button)
for 5 seconds. ARM will flash on the display. To revert back to the primary function of Roller Out just press the Esc button again, ARM disappears from the display.
In the automatic wrap sequence this unfolding function is performed automatically.
Note
the Wrap Arm Fold and Unfold apply to the 1320 Model only.
- Rollers In or Wrap Arm Fold (R5)
This function operates in a similar fashion to the above Roller Out/Wrap Arm Unfold, just both function operate in the opposite direction.
- Pressing the Auto/Start (R6) button during an automatic wrapping sequence (after 4 or more wraps) will finish the sequence on the next rotation of the arm. The arm folding and cutter
functions will operate as normal.
Operation in Manual mode
‘M’ on the display indicates that the controller is set in manual mode. If not, press (L6) to select.
In manual mode you have total control of every stage of the wrapping cycle.
Controller Outputs
The following are the electric solenoid valves powered for each machine function. The vale numbering corresponds to the numbers on the electric cables to the valves.
Note: Valve 7 (Master Valve) is powered for all functions.
* In fast speed
Operation
Powered Solenoids
Loading
7
5
6*
Wrapping:
7
4
Unloading:
7
5
8
Reverse:
7
9
Arm Unfold:
7
9
Arm Fold:
7
11
Cutter Open:
7
1
Cutter Close:
7
2
7. EXPERT CONTROLLER INFORMATION
Summary of Contents for S200 VariAuto
