background image

                                                                                                       TX7331 Intelligent Graphic Repeater Panel  

 

 

        Installation & Operation Manual  

                                                                                                                               4050100365-Rev1.1-1117                                                                      

 

 

    TANDA UK  

                                                                                                                                           

Specifications are subject to change without prior notice 

     

 

 
 
Product Safety 
 
 
To prevent severe injury and loss of life or property, read the instruction carefully before installing the 
Intelligent Graphic Repeater Panel  to ensure proper and safe operation of the system. 

 

 
 
 
 

 

European Union directive 

2012/19/EU (WEEE directive): 

Products marked with this symbol cannot be disposed 

of as unsorted municipal waste in the European Union. For proper recycling, return 
this  product  to  your  local  supplier  upon  the  purchase  of  equivalent  new 
equipment, or dispose of it at designated collection points.

  

 
For more information please visit the website at 

www.recyclethis.info

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for TX7331
















Reviews: