Quick Install Guide for StorageCab4000 with Windows Storage Server 2003
8
Initial Setup
Software Setup
1.
Press the power switch on the front panel to boot the NAS.
2.
The startup wizard appears upon startup to guide you through the setup process. You will
need to approve the Software License Agreement and enter your activation key code, as in
other Windows software installations. You are also prompted to enter the initial
administrator name and password. Record what you enter, or you will not be able to access
the NAS later.
3.
After entering the activation key code, to set the IP address, note that “Normal”
installation assumes that you have a DHCP server on your network to assign the NAS IP. If
not, you can use the “Custom Settings” process to assign a static IP. Record what you enter
to save some time when you need to access the NAS from a browser.
An alternate method of setting the IP is to select
Network Connections
from the Windows
Control Panel:
Select the local area connection, and use
Properties
to open the dialog to the right.
Highlight the TCP/IP option and select
Properties
again to open the Windows
dialog used to set an IP address.
Use
Obtain the IP Address
Automatically
only if you have DHCP;
otherwise select
Use the Following IP
Address
and fill in all fields.
4.
When the Wizard is finished, the NAS will reboot automatically.
