manualshive.com logo in svg

TANDBERG 2000 MXP, User Manual

The TANDBERG 2000 MXP is a cutting-edge video conference system designed for seamless communication. With its sleek design and advanced features, this device revolutionizes the way we connect. To make the most of this product, ensure you download the free Short User Manual from 88.208.23.73:8080, providing step-by-step instructions.

Share
Download
background image

TANDBERG 2000 MXP 

252 

IP Password

 

 

By setting an IP Access Password on the system, all access to the system using IP (Telnet, FTP 
and WEB) requires a password. This password can be enabled from telnet or dataport using the 
command: ippassword <ip-password>.  The default IP username and password is "TANDBERG". 
To remove this password, use the command: "ippassword ”. From telnet, this is only possible by 
first entering the correct password. 
 

IP 

Services

 

 

The different IP services on the system - FTP, Telnet, Telnet Challenge, HTTP, HTTPS, SNMP 
and H.323 can be disabled to prevent access to the system. By using the commands below, the 
services can be independently enabled/disabled: 
 
xconfiguration Telnet/TelnetChallenge/FTP/HTTP/HTTPS/H323 Mode: <On/Off> 
xconfiguration TelnetChallenge Mode: <On/Off> [port] 
xconfiguration SNMP Mode: <On/Off/ReadOnly/TrapsOnly> 
 

SNMP Security alert

 

 

This function will notify any Management Application (such as TMS - TANDBERG Management 
Suite) if anyone tries to perform Remote Management on the system using an illegal password. 
The Security alert that is sent to the Management Application will contain information about the IP 
address and the service (WEB, Telnet, FTP) being used for the attempt. If TMS is used, email 
notifications or alarms about the attempt can be sent to specified persons. 
 

Encryption 
 

All TANDBERG systems support both AES and DES encryption. By default this feature is 
enabled such that when connecting with any other video system or MCU, a TANDBERG system 
will attempt to establish a secure conference using AES or DES encryption. The TANDBERG 
system will attempt this for both IP and ISDN connections. Where a remote system or MCU 
supports encryption, the highest common encryption algorithm will be selected on a port-by-port 
basis. 
 
The type and status of the encryption negotiated is indicated by padlock symbols and on-screen 
messages. Encryption on the TANDBERG systems is fully automatic, and provides clear security 
status indicators; 

ƒ

 

An open padlock indicates that encryption is being initialized, but the conference is not 
yet encrypted.   

ƒ

 

Single padlock indicates DES encryption. 

ƒ

 

Double padlock indicates AES encryption.  

 
In addition to on-screen indicators the Call Status menu provides two information fields regarding 
call encryption. The first field is the Encryption Code, which will identify either AES or DES. The 
second field is the Encryption Check Code and is comprised of an alphanumeric string. This 
string will be the same for systems on either side of an encrypted conference. If the Check Codes 
do not match, this would indicate that the call has been exposed to a Man In The Middle attack. 
 
When a system with MultiSite functionality hosts a conference, the highest possible encryption 
algorithm will be negotiated on a site-by-site basis. MultiSite conferences can therefore support a 
mix of AES and DES encrypted endpoints in the same conference. A conference will only be as 
secure as its weakest link. 
 
All systems supporting DES encryption can upgrade to AES encryption. Please contact your 
TANDBERG representative for more information. The standards supporting the encryption 

Summary of Contents for 2000 MXP



























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 MXP

Rane ECS Hardware Manual preview
ECS
Brand: Rane Pages: 14
µ-Dimension COMPETITION ProZ4-80 Manual preview
COMPETITION ProZ4-80
Brand: µ-Dimension Pages: 7
auna multimedia MC-30 DAB Manual preview
MC-30 DAB
Brand: auna multimedia Pages: 124
GRAUPNER MC-22S Programming Manual preview
MC-22S
Brand: GRAUPNER Pages: 180
Festo EduTrainer 8071407 Operating Instructions Manual preview
EduTrainer 8071407
Brand: Festo Pages: 80
Elko eLAN-RF-003 Instruction Manual preview
eLAN-RF-003
Brand: Elko Pages: 18
MKS EtherCAT 390 Series User Instruction Manual preview
EtherCAT 390 Series
Brand: MKS Pages: 42
vistaCNC Mach III P1A Manual preview
Mach III P1A
Brand: vistaCNC Pages: 6
Mantracourt T24-RM1 User Manual preview
T24-RM1
Brand: Mantracourt Pages: 24
Daewoo RG-361 Service Manual preview
RG-361
Brand: Daewoo Pages: 31
Nortel Meridian Norstar User Manual preview
Meridian Norstar
Brand: Nortel Pages: 18
Roadstar CD-810BT Instruction Manual preview
CD-810BT
Brand: Roadstar Pages: 16
LENCO MDV-15 Instruction Manual preview
MDV-15
Brand: LENCO Pages: 24
Cambium Networks PTP 820E Quick Installation Instructions preview
PTP 820E
Brand: Cambium Networks Pages: 16
Sharp QT-CD210H Serivce Manual preview
QT-CD210H
Brand: Sharp Pages: 36
Philips FW 780P Instructions For Use Manual preview
FW 780P
Brand: Philips Pages: 28
Philips OccuSwitch Wireless Installation Manual preview
OccuSwitch Wireless
Brand: Philips Pages: 2
Philips LDTS07 User Manual preview
LDTS07
Brand: Philips Pages: 10

Brands by name

Popular brands

Load more brands