TANDBERG 2000 MXP User Manual Download

Page: 304 / 314

290

8 Glossary

199 AV1:

External input for the TANDBERG/LOEWE monitor.

2nd monitor:

The second monitor of your videoconferencing system. The second monitor is

normally placed on the right side of the first monitor.

4CIF:

4 times CIF, 704x576 pixels

4SIF:

4 times SIF, 704x480 pixels

AACLD:

Advanced Audio Coding Low Delay

Access code:

Use Access codes to password protect outgoing calls.

Accessories box:

The cabinet contains the following: W.A.V.E. camera, table microphone,

remote control and tracker and documentation.

Accessories drawer:

See Accessories box

AES:

Strong encryption. (Advanced Encryption Standard)

AGC:

Automatic Gain Control. Maintains the audio signal level at a fixed value by attenuating

strong signals and amplifying weak signals. Very weak signals, i.e. noise alone, will not
be amplified.

Alert speaker:

The internal speaker will warn you of an incoming call even though the monitor

may not be switched on.

Audio call:

Audio call equals a telephone call. You can make a call with the video system with

audio only.

Audio input 4:

Intended for connection to an external microphone amplifier or an external fixed

mixer.

Audio input 5:

Intended for connection to external playback devices (or to telephone add-on

hybrids).

Audio input 6:

Intended for connection to a VCR or DVD player or other external playback

devices.

Audio out 1:

Intended for connection to TANDBERG Natural Audio, televisions or audio

amplifiers.

Audio out 2:

Intended for connection to audio recording equipment (or to a telephone add-on

hybrid).

Audio out 3:

Intended for connection to a VCR or other recording equipment.

Auto-display snapshot:

Sent and received snapshot will automatically appear on full screen

display.

Auto answer:

The system will automatically answer all incoming calls.

Automatic Duo Video:

Duo Video Mode is put to Auto. When starting a presentation, Duo Video

will start automatically (if possible).

Summary of Contents for 2000 MXP



























































































































































































































































































































Search results

Summary of Contents for 2000 MXP

Reviews:

Related manuals for 2000 MXP

Brands by name

Popular brands

TANDBERG 2000 MXP, User Manual

Search results

Summary of Contents for 2000 MXP

Reviews:

Related manuals for 2000 MXP

Brands by name

Popular brands