TANDBERG 6000 MXP
260
6.13 Extended Display Identification
Data (EDID)
Extended Display Identification Data (EDID) is a VESA standard data format that will allow the
system to communicate its capabilities, including vendor information like the supported VGA-
formats and frequency range limits to a PC connected to the XGA/DVI input.
Note that this requires a system supplied with a XGA/DVI input.
This means that the PC always* will be able to output a valid VGA/DVI signal to the system with
no manual reconfiguration of the PC screen settings.
TANDBERG supports EDID structure v1.3, which adheres to the MS Plug & Play definition.
This standard contains information on product ID, basic display parameters, timing identifications
and detailed timing descriptions.
In F1 and above, TANDBERG will use the EDID information to decide which resolution to use,
800x600 @ 75Hz or 1024x768 @ 60Hz.
Example (1024x768@60Hz)
Detailed timing description:
PixelClockDiv10000:
6500
Horizontal Active:
1024
Horizontal Blanking:
320
Vertical Active:
768
Vertical Blanking:
38
Horizontal Sync Offset:
24
Horizontal Sync Pulse Width:
136
Vertical Sync Offset:
3
Vertical Sync Pulse Width:
6
Horizontal Image Size:
Not available
Vertical Image Size:
Not available
Horizontal Border:
0
Vertical Border:
0
Summary of Contents for 6000 MXP Profile
