Administrator Settings
173
Note that if Stereo Speakers are enabled in the menu without having any stereo speakers
connected to the Digital NAM, it may cause the acoustic echo-canceller to malfunction.
If the system is
connected to a Digital NAM
, stereo sound on the loudspeakers shall be
present if a stereo input signal is connected to the inputs VCR-Left and VCR-Right or a stereo
signal is received from the Far End.
If the system is
not connected to a Digital NAM
, stereo sound on the loudspeaker outputs
will be present in the following situations:
If system is idle and a stereo input signal is connected to the inputs VCR-Left and
VCR-Right.
If system is in a call with mic off and a stereo input signal is connected to the inputs
VCR-Left and VCR-Right, or a stereo signal is received from the Far End.
Otherwise the Loudspeaker Left signal will be equal to Loudspeaker Right.
Summary of Contents for 700 MXP
