TANDBERG 700 MXP User Manual Download

Page: 302 / 307

TANDBERG 7000 MXP

288

Non Standard Facility:

The network provider may require service selection in your ISDN

configuration. Valid NSF codes are from 1 to 31. 0 will disable NSF service codes.

NR:

Noise Reduction. Reduces constant background noise (e.g. noise from air-conditioning

systems, cooling fans, etc.).

NSF:

Non Standard Facility.

NTSC:

National Television System Committee. Video standard corresponding to 4SIF. Primary

used in USA, Japan and other countries.

Option Key:

Required by the system to activate optional features such as MultiSite and

Presenter.

PAL:

Phase Alternation by Line. Video standard corresponding to 4CIF. Primary used in Europe,

Middle East and Asia

Parallel dial:

Channels will be dialed and connected in parallel when setting up a bonding call.

PC PresenterTF:

An easily accessible PC connection plug. When connected the PC image is

displayed on the monitor.

PC SoftPresenterTF:

Shows PC images via the LAN connection.

PIP:

Picture-In-Picture

point-to-point call:

A call with two participants including your self

POP:

Picture Outside Picture. POP is a picture layout mode that is optimized for wide screens:

Full screen, 1+3 layout and emulated dual monitor layout.

Presentation:

Presentation means to show another video source. Use the Presentation Key for a

predefined presentation source. Use the presentation menu to choose among all
available video sources.

Presentation source:

The video source that is on display when you press the Presentation Key

on the remote control

Presets:

Predefined camera positions (and video sources)

QCIF:

Quarter CIF, 176x144 pixels

QSIF:

Quarter SIF, 176x120 pixels

Release Floor:

To end the request floor function.

release floor to site:

Allows the chairman to release the floor.

Remote:

Short for Remote Control

Request Floor:

The MCU will broadcast the video in full screen to all other participants in the

conference. If the MCU conference has a chairman, a request will be sent to the the
chairman.

Summary of Contents for 700 MXP




















































































































































































































































































































Search results

Summary of Contents for 700 MXP

Reviews:

Related manuals for 700 MXP

Brands by name

Popular brands

TANDBERG 700 MXP, User Manual

Search results

Summary of Contents for 700 MXP

Reviews:

Related manuals for 700 MXP

Brands by name

Popular brands