TANDBERG 3G Gateway
Data port Command Interface User Guide
D1320203
5
If communication cannot be established between the PC/terminal and the TANDBERG 3G Gateway’s Data
port the following should be checked:
•
Verify that the serial cable is a straight through 9-pin to 9-pin cable
•
Confirm that the configuration of the PC/terminal’s serial RS-232 port is identical to the
configuration of the TANDBERG 3G Gateway RS-232 port.
•
Verify that the PC/terminal’s serial RS-232 port is working properly by connecting it back-to-back
to another PC/terminal and send characters in both directions
1
.
1
It requires a null-modem cable to perform this test