TANDBERG Video Portal
Data port Command Interface User Guide
4.2.2.
General Video Portal Commands
Command: Description:
ExternalManager
This command sets the path and address of the TMS server. A message is sent to TMS when the
Video Portal starts up to signal TMS that the Video Portal is ready.
ExternalManager Path: <S: 0, 255>
or
ExternalManager Address: <S:0, 64>
--
sub-commands:
•
Path
•
Address
, the IP address of the manager
Example of
ExternalManager
feedback
*c xConfiguration ExternalManager Path:
"tms/public/external/management/SystemManagementService.asmx"
*c xConfiguration ExternalManager Address: ""
NTP
This command sets the address of the NTP server.
NTP Address: <S: 0, 64>
--
sub-commands:
•
Address
, the IP address of the server
Example of
NTP
feedback
*c xConfiguration NTP Address: "131.188.3.220"
Options
View and adapt option keys
NOTE! The Video Portal needs to reboot before the changes will take effect
.
Options [1 .. 64] Key: <S: 0, 90>
---
sub-commands:
•
Key
: Option key for e.g. BRI, PRI or SS7 trunks, VP call package.
Example of
Options
feedback:
*c xConfiguration Options 1 Key: "115201SS7-1-55C3EBB7"
*c xConfiguration Options 2 Key: "115201P1-1-6A96DAA4"
*c xConfiguration Options 3 Key: "115201P1-2-1811D4FA"
*c xConfiguration Options 4 Key: "115201P1-3-79828C53"
*c xConfiguration Options 5 Key: "115201P1-4-B5E5BD4A"
D1392602
19
