150
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
TANDBERG FindMe™ user guide
Configuring your FindMe user account
Device name
Enter a description of how you refer to the device. This name is
not seen by the people calling that device.
Address or number
The contact address / alias / number of the device. Depending
on the type of device you should use the following formats:
•
video endpoints: enter any alias with which the device is
registered
•
3G mobile phones:
•
to route video to your mobile phone, you must have a 3G
gateway - enter the gateway’s prefix followed by the mobile
phone number
•
to route voice only, enter the mobile phone number along
with any prefixes required by your dial plan for external calls
•
telephones: enter the extension number (for internal calls) or
the full telephone number, along with any necessary prefixes
Information
The system administrator can include
instructions here. It could, for example, show
you how to format your device addresses.
Picture
Choose a picture to associate with the type of device.
Note that the pictures only act as a guide and are for your own
benefit. They have no effect on how calls to that device are
handled.
For example you could use
to indicate a forwarding address
of a colleague, or
for voicemail.
Defining device details
This page is used to define a new device such as an endpoint,
Movi client or telephone, or to change the details of an existing
device.
To get here from the FindMe home page, click
Add new device
to define a new device, or click
Edit
against the device whose
details you want to modify.
Save / Cancel
Click
Save
to confirm your changes and return to the FindMe home page.
Click
Cancel
to discard your changes and return to the FindMe home page.
