181
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
CPL reference
field
Within the
address-switch node
, the mandatory
field
parameter specifies which address is to be considered. The supported attributes and their interpretation are as follows:
Authentication mode: On
Authentication mode: Off
Field parameter attributes
SIP
H.323
SIP
H.323
origin
The "From" and "ReplyTo" fields of the
message if it authenticated correctly,
otherwise
not-present
.
The source aliases from the original
LRQ or ARQ that started the call if it
authenticated correctly, otherwise
not-present
. Because SETUP
messages are not authenticated, if the
VCS receives a SETUP without a preceding
RAS message the origin will always be
not-present
.
The "From" and "ReplyTo" fields of the
incoming message.
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from
the SETUP.
unauthenticated-origin
The "From" and "ReplyTo" fields of the
incoming message.
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from the
SETUP.
The "From" and "ReplyTo" fields of the
incoming message.
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from
the SETUP.
authenticated-origin
The "From" and "ReplyTo" fields of the
message if it authenticated correctly,
otherwise
not-present
.
The source aliases from the original
LRQ or ARQ that started the call if
it authenticated correctly otherwise
empty. Because SETUP messages are
not authenticated, if the VCS receives a
SETUP without a preceding RAS message
the origin will always be
not-present
.
not-present
originating-zone
The name of the zone or subzone for the originating leg of the call. If the call originates from a neighbor, traversal server or traversal client zone then this will equate to
the zone name. If it comes from an endpoint within one of the local subzones this will be the name of the subzone. If the call originates from any other locally registered
endpoint this will be "
DefaultSubZone
". In all other cases this will be "
DefaultZone
".
originating-user
The username used for authentication.
not-present
registered-origin
If the call originates from a registered endpoint this is the list of all aliases it has registered, otherwise
not-present
.
destination
The destination aliases.
original-destination
The destination aliases.
If the selected field contains multiple aliases then the VCS will attempt to match each address node with all of the aliases before proceeding to the next address node i.e. an address node matches if it
matches any alias.
address-switch