TANDBERG Educator MXP & Professional MXP Videoconferencing System
20
3. System Name
Enter a name in the
‘
System Name
’
field using the number keys on the remote control, as you would do
with a mobile or cellular phone.
4. Dual Monitor
If you are using two monitors, set Dual Monitor to On.
If you are using one monitor, set Dual Monitor to Off.
5. Auto Answer, Max Call Length, Global Phone Book Settings and Permissions
Leave Auto Answer, Max Call Length, Access code and Permissions unchanged if no special needs are
required.
6. Screen Settings
When using wide screen (16:9) monitors, set TV Monitor Format to Wide (16:9). TANDBERG also
recommends setting Picture Layout to Picture outside Picture when using 16:9 monitors. Picture
outside Picture provides a display layout optimized for wide screen monitors. The display layout may be
changed at any time using the Layout button on the remote control.
7. Software Options
To activate MultiSite and/or Presenter and bandwidth, you must enter a new option key in the Software
Options menu (see paperwork accompanying your system). For more information on these options,
contact your TANDBERG representative.
8. Save changes
Remember to save any changes you make in a menu by selecting the Save button on the Menu line
and pressing OK.
Network configuration:
1. Open the Network menu
Open the
‘
Administrator Settings
’
menu and choose
‘
Network
’
.
2. ISDN configuration
Set
‘
Current Network
’
to the network you want to use. Specify the settings for the selected network in
the relevant menu.
3. LAN configuration
In the
‘
Administrator Settings
’
menu, choose
‘
Network and LAN Settings
’
. Specify the necessary LAN
settings according to the instructions from your LAN administrator.
4. Save changes
Remember to save any changes you make in a menu by selecting the Save button on the Menu line
and pressing OK.
