Technical Specification
Page B-8
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Item
Specification
A-weighted
70 dB
Unweighted
70 dB
User Levels @ 1 kHz (0 to 50 dB)
K
+10 dB
±0.2 dB
-10 dB
±0.2 dB
-20 dB
±0.2 dB
-30 dB
±0.2 dB
-40 dB
±0.3 dB
-50 dB
0 to -2 dB
Phase @ 0 dBs
Z
40 Hz
±2°
100 Hz
±2°
315 Hz
±2°
1 kHz
±2°
6.3 kHz
±2°
10 kHz
±2°
15 kHz
±2°
Embedded Audio (Via SDI)
Audio embedded on the serial digital interface can also be extracted. Up to
four stereo pairs of audio can be extracted from the SDI. The Encoder can
extract two DIDs at once, giving four stereo pairs.
Table B.10: Embedded Audio Specification
Item
Specification
Serial Digital Interface
Safety status
SELV
Connector designation
SDI IN
Connector type
BNC female connector
Input standard
ITU-R RECMN BT.656-3
SMPTE 272M-A
B.2
Test Tones
Table B.11: Test Tones Specification
Item
Specification
Level
0 dB at 18 dB clip level
Frequency
1 kHz at 48 kHz sampling frequency
Bit-rate
96 kbit/s
NOTE…
Clip Level refers to the head room above 0 dBu, prior to the audio being clipped.