Operating the Equipment Locally
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
Page 4-29
ST.TM.E10074.1
If the control equipment is a TT7000 System Manager, ensure that the
Auto Lip Sync option is turned on (see Auto Lip Sync Option on
page 4-56). The TT7000 does not have a lip sync function therefore the
Encoder has to provide this.
Action On PID Error Option
To access the Action on PID Error option, press the Action on PID Error
softkey in the
Advanced Menu
.
Action on PID Error
Action on PID Error :
+
Raise Alarm
—
Enter
l
Update using softkeys
Quit
l
Table 4.20: Action on PID Error Options
Selected Option
Description
Raise Alarm
An error message is displayed if a PID error is found.
Auto Correct
If a PID error is found it is automatically corrected.
SNMP Control Option
To access the SNMP Control option, press the SNMP Control softkey in
the
Advanced Menu
.
SNMP Control
SNMP Control :
+
No Reply/Initialisation
—
Enter
l
Update using softkeys
Quit
l
Table 4.21: SNMP Control Options
Selected Option
Description
No Reply/Initialisation
No SNMP reply during initialisation.
No Lockout/Initialisation
Reply as modules start to appear.
Display Contrast Option
NOTE…
When this softkey is pressed, the display changes immediately.
To access the Display Contrast option, press the Display Contrast softkey
in the
Advanced Menu
. This option allows the contrast ratio of the LCD
display to be set. The contrast range is: Very Light, Light, Medium, Dark,
Very Dark. As the key is pressed the display changes.