background image

 

TANDBERG Gatekeeper/Border Controller API User Guide 

 

D14172.01 

page 40 of 84 

Gatekeeper ForwardLocationRequests: <On/Off> 

Determines the behavior of the system when it receives from another Gatekeeper a location 
request (LRQ) that it cannot resolve locally. On: the request will be forwarded to neighbor 
Gatekeepers. Off: the request will not be forwarded. 

Gatekeeper DNSResolution Mode: <On/Off> 

Determines whether or not DNS lookup of H.323 URIs is enabled on this system. 

Gatekeeper ENUM Mode: <On/Off> 

Specifies whether the system will attempt ENUM resolution for E.164 numbers. 

Gatekeeper ENUM DNSSuffix [1..5]: <S: 0, 128> 

Specifies a DNS domain to use when attempting ENUM resolution. 

Gatekeeper LocalDomain DomainName: <S: 0, 128> 

Specifies the DNS name of the domain that the system is responsible for. Used when 
searching for matching endpoint registrations. 

Gatekeeper Registration RestrictionPolicy: <None/AllowList/DenyList> 

Specifies the policy to be used when determining which endpoints may register with the 
system. 

Gatekeeper Registration AllowList [1..2500] Pattern: <S: 0, 60> 

Specifies an entry to be added to the Allow List. If one of an endpoint's aliases matches one 
of the patterns in the Allow List, the registration will be permitted. 

Gatekeeper Registration DenyList [1..2500] Pattern: <S: 0, 60> 

Specifies an entry to be added to the Deny List. If one of an endpoint's aliases matches one 
of the patterns in the Deny List, the registration will not be permitted. 

Gatekeeper Registration ConflictMode: <Overwrite/Reject> 

Determines how the system will behave if an endpoint attempts to register an alias currently 
registered from another IP Address. Reject: denies the registration. Overwrite: deletes the 
original registration and replaces it with the new registration. 

Gatekeeper Alternates Monitor: <On/Off> 

Controls whether or not alternate gatekeepers are periodically interrogated to ensure that 
they are still functioning. In order to prevent delays during call setup, non-functional 
alternates will not receive Location Requests. 

Gatekeeper Alternates Alternate [1..5] Address: <S: 0, 128> 

Specifies the IP Address of an alternate system. Up to 5 Alternates may be configured. 
When the system receives a Location Request, all Alternates will also be queried. 

Gatekeeper Alternates Alternate [1..5] Port: <1..65534> 

Specifies the IP Port of an alternate system. 

Gatekeeper Policy Mode: <On/Off> 

Enables and disables use of Administrator Policy. 

Summary of Contents for Gatekeeper/Border Controller





















































































Reviews: