16
Amplifiers:
Huldra 8 has 2 transistorized power amplifiers with individual volume adjustment. The
two amplifiers can play one source in mono or stereo or two separate sources in mono.
Frequency range:
20-20000 Hz (-3dB at 30 and 17000 Hz)
Output power:
2 x 10 Watt
Pre-amplifier for magnetic pick-up:
A separate pre-amp with 2 transistors per channel enables
max. output from the power amplifiers from a magnetic pick-up. The pre-amp has a selector with
correction curves for magnetic- ceramic and crystal pick-ups.
Connections:
Huldra 8 has 5-pin DIN connectors for connection of tape deck and turntable. Some
units have RCA Phono connectors in addition. There is a diode output for recording radio. Each
amplifier has 2 sets of 2-pin DIN speaker connections for APP (main) and SEP (separate) speakers.
Some units have banana sockets in addition to the 2-pin DIN plugs. The optimal speaker load is 4
Ohms per channel.
10 push buttons
for selection of wave band, tape recorder, turntable, Mono/Stereo, AM
selectivity and AFC for FM.
