Operating the Equipment Locally
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
Page 3-7
ST.RE.E10152.2
Figure 3.8: ASCII Setup Dialog Box
The terminal emulation parameters are now set and do not require
resetting unless the configuration has not been saved prior to exiting the
program.
Terminal Connection and Protocol
The Terminal control port is configured as a Data Terminal Equipment
(DTE) communications port with the following specification:
•
19200 baud
•
8 data bits
•
No parity
•
1 stop bit
•
No flow control
Figure 3.9: Local Terminal Connections
Required settings:
As shown in the ASCII Setup screen.
