Operating the Equipment Locally – Navigating the Display Screens
Page 3-10
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
ST.RE.E10152.2
Connected to 192.168.55.3
Modulator Identity:DEV001
TANDBERG Television SM6600 Satellite Modulator
Software Version 02.00 Jan 28 2005, 17:45:04
Base Unit: SM6610/BAS IF Output
Hardware Options
Option 1: Not Fitted
Software Options
SM66XX/SWO/HS Extended Symbol Rate
SM66XX/SWO/HOM Higher Order Modulations
Figure 3.12: Example Boot Display
3.2.2
Navigating the Menus
Each of the menu screen choices is accompanied by a number. Press the
associated number followed by Enter to select the required command or
option. The last command in each menu is
Exit
or
Quit
. This causes the
display to revert to the previous menu in the hierarchy. Refer to
Figure 3.13 which shows the hierarchical structure of the menus and
sub-menus.
NOTE…
The screens displayed in this Reference Guide are only representations – there may be differences
between these and the screens actually displayed, depending upon the specific Modulator model, the
hardware options fitted (if any) and the software options installed.
