Operating the Equipment Locally – Main Menu Option 1: Quick Setup Menu
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
Page 3-13
ST.RE.E10152.2
3.4
Main Menu Option 1: Quick Setup Menu
3.4.1
Quick Setup Menu
Type 1 at the prompt to enter the
Quick Setup Menu
from the
Main Menu
.
The menu for Modulator model SM6610 provides the following options:
TANDBERG Television SM6600 Satellite Modulator: DEV001
Quick Setup Menu
1 Data Select : ASI 1 10 IF Frequency : 70.000 MHz
2 Packet Size : 188 bytes 11 Uplink Freq : 12.870000 GHz
3 Rate Adapt : OFF 12 IF Power : -10.0 dBm
4 Bit Rate : 27.647059 Mbit/s 13 IF Output : ON
5 Symbol Rate : 20.000000 Msym/s 14 Mod. State : ON
6 Coding Mode : DVB 15 IF Spectrum : Normal
7 Modulation : QPSK 16 UpConv Freq : 12.800000 GHz
8 FEC Rate : 3/4 H Help
9 Roll-off : 35 % Q Quit
Status: No Alarms
Please enter your selection, then press Enter:
NOTES…
1.
The options available in this menu, their numbering and the ranges of some parameters are
dependent upon the specific Modulator model, the hardware options fitted and the software
options installed in it.
2.
For menu options where the option number varies depending upon the Modulator model, the
option number is followed by the applicable model number(s) enclosed within brackets.
3.4.2
Quick Setup Menu Options
Quick Setup Menu Option 1: Data Select
Data Select enables the user to select one of the available input ports, or
one of two internally generated test signals (Null Packets or PRBS), as the
input data source to the Modulator.
Data Select : Current Value= "ASI 1"
1 ASI 1
2 ASI 2
3 Null Pkts
4 PRBS
NOTE…
The options available are dependent upon whether or not an input option card is fitted. The options
shown in the above display are for a Modulator with no input option card. If the DVB ASI & SPI Input
card is fitted, then three additional options (ASI 3, ASI 4 and SPI) are available.
