Operating the Equipment Locally – Main Menu Option 4: System Menu
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
Page 3-33
ST.RE.E10152.2
Do you want to change it (Y/N)?:
- Y Pressed
Enter the new gateway IP address: 192.168.63.254 -
New IP address
entered
Gateway address updated
Network reconfigured
The use of the gateway is currently:Enabled
Do you want to change it (Y/N)?:
- N Pressed
Press Enter to continue
Ethernet Configuration Option 5: Display Ethernet Port Usage
Type 5 at the prompt to view the
Display Ethernet Port Usage
screen
from the
Ethernet Configuration Menu
. It displays the status of the two
Ethernet connectors on the rear panel.
Display Ethernet Port Usage
+---------------------------------------------------------------+
\ |
/ |
\ /\ /\ +------------------+ |
/ | | | | O| |O |
\ \/ \/ +------------------+ |
/ |
\ |
/ +------+ +------+ |
\ | LIVE | | | +----------+ +----------+ |
/ O |IN USE| | | O| |O O| |O |
\ ++ ++ ++ ++ +----------+ +----------+ |
/ +----+ +----+ |
\ 1 2 RS-232/485 Reset/Status |
/ Ethernet |
+---------------------------------------------------------------+
Press Enter to continue
Table 3.2: Display Ethernet Port Usage Screen Messages
Message Description
LIVE
There is a cable plugged in which is connected to a network
IN USE
The Modulator is using data from this connector
It is possible for both links to be live but only one will be in use at any one
time.
