Operating the Equipment Locally – Main Menu Option 4: System Menu
Page 3-34
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
ST.RE.E10152.2
Ethernet Configuration Option 6: SNMP Setup
Type 6 at the prompt to view the
SNMP Setup Menu
from the
Ethernet
Configuration Menu
. It displays the current settings and displays the
status.
TANDBERG Television SM6600 Satellite Modulator: DEV001
SNMP Setup Menu
1 Display Current Settings
2 Set SNMP to Monitoring Only
3 Set SNMP to Full Control
4 Set SNMP alarm text mode to Verbose
5 Set SNMP alarm text mode to Terse
H Help
Q Quit
Status: No Alarms
Please enter your selection, then press Enter:
Table 3.3: SNMP Setup Menu Options
Command Messages
1
Display Current Settings
The SNMP mode is set to Monitor Only / Full Control.
The SNMP alarm text mode is set to Verbose / Terse.
2
Set SNMP to Monitoring Only
SNMP mode updated.
Already set to monitor only mode.
3
Set SNMP to Full Control
SNMP mode updated.
Already set to full control mode.
4
Set SNMP alarm text mode to Verbose
SNMP verbose alarm text mode updated.
Already set to verbose alarm text mode.
5
Set SNMP alarm text mode to Terse
SNMP terse alarm text mode updated.
Already set to terse alarm text mode.