Technical Specification
Page B-14
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
ST.RE.E10152.2
EN 61000-3-3
European
Electromagnetic Compatibility (EMC),
Part 3. Limits; Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for equipment
with rated current
≤
16 A.
EN 55024
European
Information technology equipment –
Immunity characteristics – Limits and
methods of measurement.
FCC
USA
Conducted and radiated emission limits
for a Class A digital device, pursuant to
the Code of Federal Regulations (CFR)
Title 47-Telecommunications, Part 15:
Radio frequency devices, subpart B -
Unintentional Radiators.
B.11.3 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
89/336/EEC of 3 May 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
73/23/EEC of 19 February 1973 on the harmonisation of the laws of
the Member States relating to electrical equipment designed for use
within certain voltage limits.
1999/5/EC of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition
of their conformity. (If fitted with telecom type interface modules).
NOTE...
The CE mark was first affixed to this product in 2004.
B.11.4 C-Tick Mark
The C-Tick mark is affixed to denote compliance with the
Australian Radiocommunications (Compliance and Labelling –
Incidental Emissions) Notice made under s.182 of
Radiocommunications Act 1992.
NOTE...
The C-Tick mark was first affixed to this product in 2004.
B.12 Cable
Types
The signal cable types (or similar) in Table B.20 are those recommended
by TANDBERG Television in order to maintain product EMC compliance.
