background image

D 14074.03
10.2007

17

TANDBERG 

VIDEO PORTAL 

USER GUIDE

Table of 

Contents

Trademarks & 

Copyright

Patents & 

Disclaimers

Safety/ 

Environmental

To Get You  

Up and Going

Using the  

Video Portal

Viewing the 

System Status

Configuring  

the Video Portal

Maintenance  

& Upgrade

Services

Dial Plan 

Examples

Contact 

Information

TANDBERG 

VIDEO PORTAL 

USER GUIDE

Using the  

Video Portal

To start the Video Portal, simply connect the 
power cable, and set the power switch button 
(both at the rear) to position 

I

On the front panel of the system the power 
indicator LED, marked 

PWR

, will turn 

GREEN

.

Power switch

Accessing the Video Portal

Forgot the Password?

The 

pwrec

 account is active for one minute following a restart. 

Beyond that time, the system will have to be restarted to 
change the password. 

Video Portal Start-up

!

 

Reboot the Video Portal.

"

 

Connect to the Video Portal via the serial interface once it has 

restarted.

#

 

Login with User Name 

pwrec

.  

No password is required.

$

 

You will be prompted for a new password.

Starting Up the Video Portal

You may access the Video 
Portal by entering the IP-
address of the Video Portal 
in a standard WEB-browser. 
You will then be asked to 
enter a password. You will 
need to enter 

admin

 as user 

name. The default password 
for the Video Portal is 

TANDBERG

. Remember 

that the password is case 
sensitive. Note that you may 
also use SSH and Telnet to 
configure the Video Portal.

USER NAME

 is 

admin

PASSWORD

. Default 

password is 

TANDBERG

 (NB! 

case sensitive)

Summary of Contents for Video Portal










































Reviews: