_____________________________________________________________
2-1
Tandberg Viking FS-1600 Series NAS Hardware User Manual
2.
Setting
Up
2.1. Requirements
When planning a site to house the Viking FS-1600 Series NAS appliance,
you may want to consider requirements for power and network availability,
as well as a space with well regulated temperature and humidity that is
relatively free of dust and other airborne contaminants. If your installation
calls for placement on a table top, apply the supplied rubber feet to the
bottom of the chassis.
Before unpacking and installing the FS-1600 Series NAS appliance, select a
suitable installation site for maximum efficiency. Consider the following
factors when choosing a site:
•
Near a grounded power outlet
•
Clean and dust-free
•
Sturdy surface free from vibration
•
Well-ventilated and away from sources of heat
•
Protected from electromagnetic fields produced by electrical devices
such as air conditioners and radio and TV transmitters.
Take note of the following information when planning where and how to
install the FS-1600 Series NAS appliance.
Warnings
Do not attempt to modify or use the supplied AC power cord if it is not the
exact type required. A product with more than one power supply will have a
separate AC power cord for each supply.
The power button on the NAS does not turn off AC power. To remove the AC
power from the NAS, you must unplug the AC power cord from the wall outlet
or power supply. The power cord is considered the disconnect device to the
main (AC) power. The socket outlet that the NAS plugs into should be
installed near the equipment and should be easily accessible.
2.1.1. Ambient
Temperature
The maximum operating temperature of the FS-1600 Series NAS appliance
is 95°F (35°C) and the relative humidity of the NAS is in the range 8% to
90% (non-condensing). Careful consideration should be given to installing
the NAS in an environment compatible with 95°F (35°C) maximum ambient
temperature.
2.1.2. Height and Weight
Before installing the FS-1600 Series NAS appliance, make sure that the
surface on which you are setting it is strong enough to bear its weight and
accommodate its size.
•
Dimensions (including front bezel): 17.2 (W) × 5.2 (H) × 25.5 (D)
inches or (437 × 132 × 648 mm)
•
Weight (approximately, depending on configuration): 72 lbs. (32.7
kg)
