Minimum
rate screw
7. With a 7/16” wrench loosen the pilot head
on the pilot assembly by a half-turn
(Fig. #19)
8. Slide the pilot adjustment band over and
ensure that the hole in the orifice band is
showing. (Fig. #20 shows NG position,
Fig. # 21 shows LP position)
9. Remove the minimum rate screw located
in the valve.
(Fig. #22)
Fig. #21
Fig. # 22
Fig. # 19
Fig. # 20
7
TC36.NG05.C 290409-12
Minimum
rate screw
