Y o u r r a d i o
26
Q
Group selector and back key
In the network mode, turning the group
selector is used for selecting groups. The
names of the current folder and group are
shown on the display. It may also be
possible to browse the groups of the
selected folder in a continuous loop.
The back key in the middle of the group
selector is used for switching between
groups. Pressing the back key switches between groups that have
the same index number as the last two selected groups (excluding
the home group), and pressing and holding the back key selects the
home group. See Home group on page 39.
In the direct mode, the group selector is used for selecting channels.
The name of the channel is shown on the display. Each channel may
have up to three groups. Pressing and holding the back key selects
the first group (A) on the channel, and pressing the back key
switches between the second and the third group (B and C) on the
channel.
If voice feedback is activated, the radio plays the index number of
the group or channel when you turn the group selector. When you
use the back key, the radio plays the index number or index name
(A, B, or C) of the group, or "Home" if the home group is selected.
See Voice feedback on page 37.
Q
PTT (Push-to-talk) key
Your radio can make and receive one-way and two-
way calls. During a one-way call, only one person
can speak at a time, and the speaker must press and
hold the PTT key. During a two-way call, the PTT key
is not used, and you can speak as in a conventional
phone call.
THR880i_Rel6_en_print.book Page 26 Jeudi, 20. novembre 2008 2:13 14
