11
1
.
In the main menu open [SET FUNCTIONS] and then [Set Clock].
2
.
Setting the desired values.
①
By moving the operation dial up and down, the selection item of the
display changes in the order of year, month, day, hour, and minute. By
pressing the dial, the value for that item will flash.
②
Set to the desired value by moving the operation dial up and down and
press the dial to set that value. Move to the next item and follow the
same procedure.
3
.
When settings are completed, adjust to [OK] and press the dial to
complete the setting procedure.
Setting the Date and Time
CAUTION !
●
After purchasing this product, please be sure to use the attached software
to set the clock and date.
●
The difference between your local time and GMT will automatically be
calculated and written, after which the correct time will be displayed.
●
If the date and time of the RTR-57C main unit are not accurate, the starting
time of a programmed start and the recorded time of downloaded data will
be different from the actual one, so please set the date and time accurately.
●
When changing the battery, the time of the main unit may become incorrect;
please check the time after every change.
12
Communicating with the Data Logger
There are two ways to communicate between the RTR-57C
and the Data Logger.
【
Via Cable / Optical Communication
】
Via Communication Cable connection for TR-7 Series and Optical
Communication for RTR-51/52/53, RVR-52 and TR-5 Series.
◆
The following operations can be done using
communication via cable or optical communication.
●
Download Recorded Data
You can download any data that has been recorded in a data logger.
●
Set the Recording Conditions
You can control and change all recording settings such as Recording
Mode, Recording Inter val, and Recording Star t Date and Time
(Programmed Start).
●
Read Logger Settings
The RTR-57C can read and display all settings for the data logger that is
connected to it.
〔
For RTR-51/52/53
,
RVR-52 and TR-51A/52
〕
Place logger face
down on RTR-57C
〔
For TR-71S/72S
〕
Connect using the included
communication cable (TR-3C10)