21
5
.
Once transmission has been completed, a message will appear on the
display telling you communication was completed successfully. By pressing
the operation dial you can go back to the Recording Settings Menu Display.
The Remote Unit(s) will begin recording.
22
Recording Modes:
One Time: Recording will stop when the data capacity becomes full.
Endless: Recording will continue with oldest data continuously overwritten.
Recording Interval:
Choose from 15 intervals: 1,2,5,10,15,20,30 seconds and 1,2,5,10,15,20,30 and
60 minutes.
3
.
Make Recording Condition Settings.
●
Before selecting a Remote Unit you can run a search to find all Remote
Units with which communication is possible. Those units with which
communication is possible will appear with a mark next to them.
(See p.45 for details)
1
.
In the Main Menu, click [REC SETTINGS] and then [ Wireless].
2
.
Select the Remote Unit for which you wish to make settings.
【
Programmed Start
】
①
Select a Group in which
Remote Units are registered.
②
Select a Remote Unit or a
Group.
