31
◆
About the Default Settings
At anytime, you can return the RTR-57C to its default settings.
Recording Mode: Endless
Recording Interval: 10 minutes
Channel Names: 1 channel…ch.1, 2 channel…ch.2
5
.
When communication has been completed the message [COMM
END] will be displayed and by pressing the operation dial, the
display will return to the menu. The Remote Unit will start
recording.
32
3
.
Move the arrow to [Programmed] after setting the conditions.
4
.
Set the recording start time and move the arrow to [REC START].
1
.
In the Main Menu, open [REC SETTINGS]-[Direct].
2
.
Set the recording conditions.
【
Programmed Start
】
Recording Modes:
One Time: Recording will stop when the data capacity becomes full.
Endless: Recording will continue with oldest data continuously overwritten.
Recording Interval:
Choose from 15 intervals: 1,2,5,10,15,20,30 seconds and 1,2,5,10,15,20,30 and
60 minutes.
