19
19
20
◆
For Windows
®
98
1.
Turn on your computer and
open Windows.
2.
After Windows has been
completely started up,
connect the supplied USB
cable to a USB port on
your computer.
3.
Insert the attached CD-ROM in the CD-ROM drive.
If the Installation Window opens, close it.
4.
By connecting a data Collector to
the USB cable already connected to
your computer, the [Found New
Hardware Wizard] will automatically
open.
5.
Check [Automatic search for a better dirver (Recommended)] and
click the [Next] button to begin installation.
[NEXT] button
6.
Check [Search for the best driver your device (Recommended)]
and click the [Next] button.
Check
[NEXT] button
7.
Check [Specify a location] and click the [Browse] button. Select
the [Device Driver] in the CD-ROM drive and click [Next].
[
NEXT] button
Check
[Browse]
button
8.
Click [Next] to start the installation. After completing installation,
click the [Finish] button. Confirm the Connections (see p.
21
).
[Finish]
button
Note
・
If the Driver is not automatically detected, please search by specifying the place as
(CD-ROM [Device Driver
¥
RTR-
57
U]) and install manually from there.