14
First Steps
1
. Installing Software
①
Open Windows
②
Close all other applications before installing this program
③
Place Software CD Rom in CD Rom Drive of your computer.
④
Open [SETUP. EXE] and follow the directions as they are displayed.
⑤
After installation is finished the Wireless for Windows program will be
registered in the [Start] Menu.
About the Control Program
The [Control Program] will be opened automatically upon Start up and an icon will appear in
the task tray. By clicking on the [Control Program] icon in the task tray you can open the [Start
up Program] as well as the [Graph Tools Program].
If a failure to properly install occurs, please re-install (see p.
45
)
2
. Installing the Battery
Please place a lithium battery (CR
123
A) in the main unit as shown in figure
below. Remember that even though you connect the Base Unit and /or the
Relay Unit(s) with the AC adapter, it is better to supply them with a lithium
battery to help prevent data loss in the case of power failure.
ch.1
ch.2
●
Always put in a new battery
●
Be sure that + and - are in the correct directions.