28
③
The monitoring results will be displayed as below. New data will be added
at the top of screen as it comes in.
④
By clicking [Stop] you can end the monitoring function. If you want to
stop monitoring during communication, you must first click [Cancel] in the
Communication Dialog Box and then [Stop], or wait until communication is
finished.
2
. Monitoring Warnings
With this function a warning message will appear on your computer screen each
time the upper or lower limit that you set when registering the Remote Unit has
been exceeded. For this function to work, it is necessary that the Base Unit be
connected to the computer, that the Wireless for Windows Control Program be
activated and that screen saver and energy saving settings are off.
①
In the [Communication] Menu select [Monitor Warnings Start / Stop]
④
