2
How the RTR500BW and RTR-600 Series are Used Together
RTR500BW is a Base Unit equipped with wired and wireless LAN functionality. It can be
set up to periodically download recorded data from Remote Units (RTR-600 Series) and
automatically send data to a server. Recorded data stored in the server can be viewed
anytime and anywhere on a PC.
Remote Unit
RTR-600 Series
Change
Settings
FTP Server
Repeater
RTR500BC
(if necessary)
Base Unit
RTR500BW
Auto-Download and Sending of Data
Save
View
Terms used in this Guide
Base Unit
RTR500BW
Remote Unit
RTR-600 Series
(RTR-602S / 602L / 602ES / 602EL, RTR-601-110 / 601-130 / 601-E10 / 601-E30)
Repeater
RTR500BC/ RTR-500 (when used as a Repeater)
Current Readings
The most recent measurements recorded by a Remote Unit
*
Recorded Data
Measurements stored in the Remote Unit
*
Current Readings are not available on the RTR-600 Series.
Getting Ready
Installing the Software
Download the following software from T&D’s website and install to your computer.
*
Do not connect the Base Unit to your computer until the software has been installed.
RTR500BW for Windows
For Base Unit Settings, Network Settings, Remote Unit Registration, etc.
(p.3)
tandd.com/software/rtr500bwforwin.html
RTR-600 Settings Utility
For Remote Unit Clock and Operation Settings, Table Settings, Data View, etc. (p.8)
tandd.com/software/rtr600-settings-utility.html
After installation is completed, you will see
RTR500BW for Windows
and
RTR-600 Settings Utility
in the Windows
Start Menu.