4
Making Network Settings
.1
In the settings window, from [Network Settings] - [Connection Method], select [Wired LAN]
or [Wireless LAN] .
*
Normally, there is no need to change the DHCP settings. Settings can be made according to the network
environment being used.
.1
When using a Wireless LAN:
Make settings for [Wireless LAN SSID], [Security Mode], and [Pre-Shared Key(password)].
*
Normally, there is no need to change the Security Mode.
.1
Check the contents of your selections and click the [Apply] button.
The operation will start with the following default settings.
•Recorded Data Transmission
*
: ON, Transmission Interval: 10 min.
•Current Readings Transmission: ON, Send at 6:00 am every day.
*
RTR-600 Series does not support this function.
If you use the RTR500BW with RTR-600 Series only, change the Sending Current Readings setting to OFF.
By default, the settings for Auto Transmission of Recorded Data are as follows.
•Transmission Method: HTTP
•Connection Destination: T&D WebStorage Service
It is possible to change the destination of recorded data to any FTP server. For the setting items in the [FTP
Settings] window, ask the administrator of the FTP server or refer to the instruction manual of the server.
Registering Remote Units
.1
In the [Remote Unit Settings] window, click on the [Register] button.
.1
When the [Connect a Remote Unit] dialog box appears, unplug the USB cable from the
Base Unit (1) and plug it into the Battery Charge Dock
*
into which the Remote Unit has
been placed (2).
USB
Connection
RTR-600BD
(2)
(1)
*
The Battery Charge Dock (RTR-600BD) needs to be purchased separately.