5
C1.
Power Connection (1 to 3 Heating Cables)
Three Cable Layout Tips
B1.
Locate bus connection (HPT and FP only) and
cable as shown. Cut end of cable at angle to
aid in piercing grommet. Leave additional
cable for expansion loop.
B2.
Insert three cables into expediter.
B3.
Mount expediter with three cables. Do not
band over cable.
Wiring Details
C2.
In-Line Splice and T-Splice
C3.
End Termination (1 to 2 Heating Cables) Re-
move jumpers for 2 cable terminations.
Terminator
TM
ZP
INSTALLATION PROCEDURES
