25
【
Starting a Recording Session
】
Press in the
[
REC
/
STOP
]
button on the front of the unit until the REC
mark appears in the display. When displayed, recording has begun.
NOTE:
●
By starting a new recording session, all data currently saved in the unit will
be erased.
●
Even if the unit is waiting for a programmed start, by pressing the
[
REC
/
STOP
]
button until the REC mark appears, you can start a new recording
session immediately.
REC mark lights up
26
3
.
When the desired recording interval appears, stop pressing the
[
INTERVAL
]
button. Within a few seconds, the current measurement
readings will return to the display and the setting will be finished.
●
By pressing the
[
INTERVAL
]
button during recording or while waiting for
a programmed recording to start, the currently set recording interval will
be displayed.
《
15 seconds
》
《
15 minutes
》
By pressing the REC switch on the main unit you can start a recording
session immediately.
※
If you wish to make changes to the device name, channel name,
recording mode or to any other recording conditions, you must make
those settings by connecting the device to your computer.
【
Stop Recording
】
You can stop a recording session by pressing the
[
REC
/
STOP
]
button
until the REC mark disappears from the display. When it has
disappeared, recording has stopped.
REC mark disappears
Setting Recording Interval from
Main Unit Switch
You can make or change recording interval settings from the "INTERVAL"
switch on the front of the TR-71U
/
72U main unit.
1
.
Press in the
[
INTERVAL
]
button on the front of the device until the
recording interval appears in the display.
2
.
With each pressing of the
[
INTERVAL
]
button the recording
interval time will change. Press until the desired setting appears.
Starting Recording from
Main Unit Switch