7
1
.
Remove the battery cover form the back of the unit.
2
.
Insert 1 AA alkaline battery, making sure that the + and – are
in the correct direction.
●
Always use a new battery.
【
Changing the Battery
】
1
.
When battery power becomes low, a battery life warning signal will
appear in the unit’s LCD display.
If, at this time you change the battery, recording will continue uninterrupted
and all data will be saved for downloading.
2
.
If the battery is not changed and power becomes even lower, SLP will
appear in the LCD display.
The unit will automatically go into sleep mode in order to protect the data
and all normal operations will stop.
If you change the battery at this point, it is still possible to download all
saved recorded data.
3
.
If the battery is further left unchanged, the display will automatically
shut off.
If all battery power is lost, all data will be lost as well.
NOTE :
If a unit is left without a battery for more than 2 minutes, all data will be lost,
so please work quickly when changing the battery.
3
.
Replace and close the battery cover.
Installing the Battery
8
Turning on the Power
1
.
By holding in the POWER switch at the left side, the unit will
turn on.
【
Turning OFF the Power
】
By holding in the POWER switch, the unit will turn off.
●
During recording, the power cannot be turned off. Please stop recording
first and then turn off the power.
●
Even if the power has been turned off, the recorded data will be saved.
However, if the battery power is totally lost, all data will be lost, so please
download data as soon as possible to avoid losing any necessary data.
POWER Switch