II) Register a TR-7wf Logger to your WebStorage Service Account
Tr-7wf Data Loggers can be registered to a WebStorage Service Account in two different ways.
The first is through a common Web Browser such as the one that was used to set up your
WebStorage Service Account.
1.
After receiving the User ID,
use it and the Password you
selected to log in to your account.
2.
Toward the top of the page click on Account.
3.
Next Click on the link to Add / Remove Devices. This will take you to the Account
Management page.
4.
There is a label with a Serial Number and Registration Code included in the box with the
TR-7wf (attach this label to the back of the unit). Enter these and click on the Add button
to register the TR-7wf to your account. You will then see the unit added to the
Registered Device List just under the Add button.
5.
At this time you may also want to go to the Settings page to set various parameters for
your account.
Important Note: While you have now added the TR-7wf to your account, it will not appear
on the Top page until after the first successful data transfer from the unit has been made.
Alternatively, you can use the T&D Thermo App on your Smart Phone or Tablet to register a
TR-7wf logger to your account.
1.
From the Home Screen in the T&D Thermo App tap the Tools
Icon.
2.
This will bring up the Settings Screen.
3.
Tap T&D WebStorage Service and enter
the User ID that was assigned to your account
and your Password, then tap Log-in.
4.
Next tap Add/Remove Devices. This
will bring up the Add/Remove Devices screen.
5.
Tap the + Icon in the upper right corner.
6.
Enter the Serial Number and
Registration code from the label that is packed
in the box with your unit.
7.
Tap Add
8.
Your TR-7wf should now appear in the
list of devices for your account.
