Safety Precautions and Instructions
The following items should be strictly obeyed for the safe
usage of this product, and for protecting yourself and other
people from bodily harm and/or damage to property.
Explanation of Symbols
Warning Symbols
DANGER
These entries are actions that absolutely under no
circumstance should be taken. The taking of such an
action may cause serious personal physical damage or
death.
CAUTION
These entries are actions that if taken may lead to
physical injury or damage to persons or things.
Picture Symbols
Denotes an
important warning
or caution.
Denotes a
forbidden action.
Denotes an action
that should not be
carried out.
DANGER
To Prevent Serious Accidents
Do not disassemble, repair or modify the unit and/or accesso-
ries.
Do not use the unit in any environment that is exposed to chem-
icals and harmful gases. Doing so may cause corrosion and/or
other danger to the unit. Also, coming in contact with hazardous
substances may cause bodily harm to the user or people nearby.
This product is not water resistant. If water or a foreign object
enters the case, immediately remove batteries and stop using it.
Do not touch the unit or AC adaptor during thunder and light-
ning, as this may cause electrocution.
Do not handle the unit, remove batteries or cables with wet
hands.
This product has been designed for private and/or industrial use
only. It should not be used in situations where strict safety precau-
tions are necessary such as with medical equipment, or in systems
directly or indirectly connected with human life or well-being.
Do not drop or expose the unit to a strong impact.
Do not cut or process the cords for the communication cables.
Also, do not twist, pull on or swing any of the cords.
To prevent damage to the unit from static electricity, remove static
electricity from your body by touching metal around you (such as
a door knob and window frame) before touching the unit.
Place and store the unit and accessories out of the reach of
children.
We are not responsible for any damage, malfunction or trouble,
whether direct or indirect, caused by the use of our product.
Do not use any battery, sensor, or cable other than those speci-
fied by T&D Corporation.
Do not put anything on top of the cable or the unit. This may
cause overheating.
Do not disconnect the USB cable during USB communication.
Doing so may cause adverse effects to the unit and/or PC.
Make sure that sensor and cable plugs are all inserted fully, so
as not to cause an improper connection. Also, when unplugging
the cable from the unit, do not pull the cord, but hold the con-
nector to disconnect.
If the unit produces heat, emits smoke or a strange smell, or
makes unusual noise, immediately remove the batteries and
stop using it. Also, unplug the unit from the PC.
If the unit is not to be used for a long period of time, remove
batteries. Leaving batteries inside the unit may cause battery
leakage and malfunction. Install new batteries when starting or
re-starting to use a unit.
For TR75A: Ch.1 and Ch.2 terminals are NOT electrically isolated
from each other. Do not attach non-isolated thermocouple
sensors to objects connected to a live voltage. This may cause a
short circuit or an electrical shock.
CAUTION
Do not place or store in the following
areas:
» Areas exposed to direct sunlight
»
Areas subject to direct flames or heaters, as well as areas in which
hot air accumulates and creates extremely high temperatures
» Areas exposed to static electricity
»
Areas exposed to strong magnetic fields
» Areas exposed to water leakage
» Areas subject to condensation or wet areas
» Areas exposed to excessive vibration
» Areas exposed to excessive smoke, dust or dirt.
CAUTION
Precautions for Battery
»
There is a risk of fire or explosion if battery is replaced by an incor
-
rect type. Use and replace only with correct size and type (AA alka-
line) of battery.
» Do not disassemble, modify, mechanically crush or cut the battery, as
it may cause battery leakage, overheating, explosion or fire.
»
Do not dispose of a battery into fire or a hot oven as this can result
in an explosion.
» Do not leave a battery in an extremely high temperature surround-
ing environment or subjected to extremely low air pressure that can
result in an explosion or the leakage of flammable liquid or gas.
CAUTION
Other Precautions
»
Use the unit in the specified operating environment. Do not use it
for any purpose other than for which it was designed.
» Condensation may occur inside the case when a unit is moved from
one environment to another where there is a great difference in
temperature.
» Do not use the unit in wet areas or places exposed to water such as
bathroom.
» When connecting the unit to your PC, make sure to follow all warn-
ings and directions from your computer manufacturer.
» We shall not guarantee the unit's operation if it has been connected
to a PC using a USB hub or a USB extension cable.
» Do not insert any foreign objects into any of the units' jacks.
» If the unit gets dirty, wipe it with a clean cloth.
» Make sure to remove dust and dirt from plugs of any cables.
»
Battery terminals may provide insufficient contact due to age or
vibration. This may lead to data loss.
»
Please note that this document has been written based on the pre-
supposition that details about contracts with an Internet provider,
specific network environments and the set-up of any other neces
-
sary equipment to enable network connection has already been
taken care of by the User and that connection has been confirmed as
workable. T&D Corporation shall not be responsible for any damages
which a contractor, a user or a third party may suffer, whether direct
or indirect, due to the inability to communicate or use communica-
tion devices.
» Please be careful not to let a third party know of your registration
code. The registration code cannot be reissued or changed.
CAUTION
Notices about Sensors
»
Do not connect any sensor to the unit other than those specified by
T&D Corporation.
» Make sure to use sensors within the measurement range indicated
in the specifications for that sensor.
» Do not connect the sensor to any data logger other than those speci-
fied by T&D Corporation.
» Do not expose the sensor to a strong impact. This may adversely
affect measurement accuracy and cause damage or malfunction.
» When the sensor is not to be used for a long period of time, please
store it at normal temperature and humidity.
» The included sensor is not water resistant. If the sensor gets wet, im-
mediately remove the sensor from the unit and wipe it with a clean
cloth as soon as possible. Then allow the sensor to dry in normal
room temperature before using it again.
»
Do not use the sensor on the human body.
Temperature-Humidity Sensor
» If extremely severe temperature changes occur, it may result in large
errors in humidity measurement. Once the sensor's temperature
becomes stable, the measurements will return to normal.
» The temperature-humidity sensors will with normal use experience
losses in precision and sensitivity over time due to degradation. If
the sensor is being used in an unsuitable environment (smoky or
dusty places) it may be necessary to change the sensor sooner.
» When using the sensor in an environment where the humidity is
under
30 %RH, the measurements may sometimes fluctuate. This is
not abnormal.
» Do not expose to condensation, dampness, corrosive gases, or
organic solvents.
Thermocouple Sensors
» We do not handle the sale of Thermocouple sensors. Please prepare
a commercially available sensor.
Package Contents
TR71A
Temperature 2ch
Data Logger
Temperature Sensor
TR-0106 x 2
AA Alkaline Battery
(LR6) x 2
USB Mini-B Cable
(US-15C)
Manual Set
(Warranty Included)
Registration
Code Label
TR72A
Temperature 1ch, Humidity 1ch
Data Logger
Temperature-Humidity
Sensor THA-3001
AA Alkaline Battery
(LR6) x 2
USB Mini-B Cable
(US-15C)
Manual Set
(Warranty Included)
Registration
Code Label
TR72A-S
Temperature 1ch, Humidity 1ch
(High-Precision Type)
Data Logger
High Precision
Temperature-Humidity
Sensor SHA-3151
AA Alkaline Battery
(LR6) x 2
USB Mini-B Cable
(US-15C)
Manual Set
(Warranty Included)
Registration
Code Label
TR75A
Thermocouple (K, J, T, E, S, R) Temperature 2ch
Data Logger
AA Alkaline Battery
(LR6) x 2
USB Mini-B Cable
(US-15C)
Manual Set
(Warranty Included)
Registration
Code Label
Getting Logger Ready for Installation
Battery Installation & Sensor Connection
Battery
Make sure to use new batteries
(including for replacement) and
insert in the correct direction.
TR71A
TR72A / TR72A-S
About TR71A Internal Sensor
Channel 1 has an internal temperature sensor. When an external sensor is not connected, the
internal sensor will be used.
About TR75A Input Terminal
When connecting thermocouple wires to the input terminal, make sure that the positive and
negative connections are in the proper order. If the polarity is incorrect, changes in temperature
will be reversed (when the real temperature increases, the measured temperature will decrease).
Wiring Connections
Connect and disconnect the thermocouple wire from the hole while pressing the input terminal
button with a screwdriver or other such tool.
Do not try to pull out the wire without pressing the button.
Compatible Wires
Single wire: 0.32 to 0.65 (AWG 28-22)
Twisted wire: 0.08 to 0.32
(AWG 28-22)
Diameter: 0.12 or more
Strip length: 9 to 10
Using GND
If measurements are unstable while using external power (USB), connect to the GND terminal.
Sensor Type Setting
Set the sensor type in the software. (TR7 for Windows - [Start Recording] tab)
Thermo Recorder TR7 Series
TR71A/TR72A/TR72A-S/TR75A
Please Read First
Strip
Button
TR71A
TR72A
TR72A-S
TR75A
Operation Buttons
Battery Cover
USB Connector (Mini-B)
Sensor Jack
Channel 1
Sensor Jack
Channel 2
(TR71A only)
Power Button
Thermocouple
Input Terminal
Part Names
The User's Manual also explains operations using the operation buttons.
