OPERATION AND FUNCTIONS
Protect the environment and turn off the unit after use.
On, Off and standby
Load a disc
If you want to play a disc, you must load it. You do that by
pressing the eject button on the remote control or on the front
panel of the CD player.
When the disc has been read, the display will show the
number of tracks on the disc and the total playback time.
If there is not disc in the tray, the message "NO DISC" will be
displayed.
Play
Press the PLAY/PAUSE button on the remote control or on the
front panel once to start playback.
The counter on the left side of the display will start to count
upward.
14
1 Turn on the unit by pressing the mains switch on the rear panel.
Then press the CD button on the remote, or the standby button on the front panel.
2 Press the standby button on the remote control to switch into standby mode. The display
will turn off and all functions will be reduced to a minimum to make sure that the unit uses
minimal power. When in standby mode the unit only reacts to the CD button of the remote
control(3).
4 If you wish to turn off the unit to avoid any power consumption, you must press the mains
switch on the rear panel.
2
2
3
POWER
HIFI-200
VOLUME
0
1
2
3
4
5
6
7
8
9
10+
TUNING
TUNING
STATION
CD
TUNER
AUX1
AUX2
DVD
AUX3
PHONO
T MODE
AUTOTUNE
MUTE
TITLE
SETUP
MENU
AUDIO
SUBTITLE
STATION
ENTER
ST/MO
MEMORY
DISPLAY
SLOW
RANDOM
REPEAT
STANDBY / ON
CDP-200 CD-PLAYER
CD
20
64 : 26
no disc
CD
01
00 : 01
