18
Sysem reset
This function makes it possible to set all setting back to factory defaults. Please notice that
once you have pressed ENTER to this menu setting, all alarm, tuner and time settings will
be deleted.
Software version
Here you can see the current software version in the radio.
Snooze and mute
The SNOOZE button works as MUTE button when the radio is on.
If you press the SNOOZE button after an alarm has been activated, the alarm will be
delayed for between 5 and 22 minutes.
When the snooze function is active, the display will show a “Z” in the upper right conrner.
To adjust the snooze time, press the MENU button to enter the settings menu. Turn the
TUNE button on the front panel until the display shows <Adjust Snooze> and then press the
ENTER button to enter the Snooze settings.
Turn the TUNE button to adjust and confirm by pressing ENTER.
Exit the settings menu by pressing the MENU button again.
Note: If the SNOOZE button is pressed during standby, the display will be iluminated for 10
seconds, so it is possible to check the time in darkness.
