12
Using the radio
Connecting the radio
Place the radio on a plain surface. Connect the included adaptor to the radio.
Check that all other connections have been made correctly before inserting the mains plug
into the wall socket. Check that the mains voltage is correct according to the voltage stated
on the adaptor before turning on the power.
The Tangent Cinque will go into standby and is ready for use.
Turn the unit on by pressing the power button on the front panel. The display will show the
message below.
When the radio is in standby, you can see what mode the radio will start up in, when it is
turned on next time. The radio will display either DAB and the time or FM and the time. The
display will not be as brightly illuminated in standby mode, as when the unit is turned on.
DAB mode
When the radio is on, select DAB mode by pressing the MODE button until the message
below appears in the display.
Scanning for station in DAB mode
When the unit has been turned on, channels must be saved. This is done by means of the
autotune function.
