4
FM Radio
Press the
Mode
button multiple times to switch between DAB/FM/BT.
The first time you do this,
the FM frequency “87.5 MHz” will be displayed
on the
screen. Remember to extend the antenna.
To auto scan, press and release the
Scan
button. This will start scanning up
the frequency band and play the first station finds with good signal.
To scan down the frequency band, press and hold the
Scan
button for a few
seconds. The radio will display station information when you press the
Info/Menu
button. Press multiple times to view all information available.
FM Scan setting
Choose between scanning strong and week signals (All) or only the strong
stations (Only). Press and hold the
Info/Menu
button. To make your choice,
twist the
Tune/Enter
button to highlight your option.
The radio will automatically save all the stations with a strong signal. After
searching has finished it will automatically play the first station Stored. Select
“FM Scan Setting” and press
Tune/Enter
button down. Turn the
Tune/Enter
button
to choose between “All” or “Only”.
Press the
Tune/Enter
button down to
confirm your choice.
Manual scan
To listen to a specific frequency, turn the
Tune/Enter
button to search forward
and back.
Mono and Stereo
In working mode, press the
Tune/Enter
button
to switch between “Set to Mono”
or “Set to Stereo”.
Bluetooth Mode
Press the
Mode
button to select Bluetooth Mode and then the display will show
“Bluetooth Pairing”.
Turn on your device Bluetooth on and search the pairing name“Dab2go Junior”
then press it to pair. After the pairing successfully, the display will show
“Bluetooth Paired Play/ Pause”.
